Industrial Page Three

 

TC2000 Temperature Calibrator

Producing true temperature references from ÷40 to 1200 °C. Scan-Sense manufactures a range of dry block calibrators including the new TC2000 with graphical display and its unique sized well provides for accurate calibration of most sensors. The special designed PID controller ensures that the temperature goes to the set point with little or no overshoot, which avoids other hysteresis being introduced.
     • Range ÷40* to 150°C
     • Accuracy ± 0,3°C
     • Stability ± 0,03°C
     • Cooling time: 50 min.
     • 1/4VGA graphical display
     • Pt-100,T/C,mV, V, 4–20mA input
     • RS232 interface
     • Windows® based software
     • 20 point aut. calibration * rel. ambient

Go back to top


FLEXIM provides process instrumentation solutions for all branches of industry. Its efforts are focused on non-intrusive flow measurement and inline process analysis.

Flowmeters for Liquids

     
FLUXUS® ADM 5107

Economy ultrasonic flowmeter for the water- and wastewater industry

FLUXUS® ADM 7407
Ultrasonic flowmeters for permanent installation, flexible configuration with various inputs and outputs

FLUXUS® ADM 6725
Portable clamp-on flowmeter, ideal for service work


Flowmeters for Gases

   
FLUXUS® G709

Gas flowmeter for permanent installation in 19" rack systems, 2 flow channels, flexible configuration with various inputs and output, explosion protected transducers can be connected

FLUXUS® G704

Gas flowmeter for permanent installation, 2 flow channels, flexible configuration with various inputs and output, explosion protected transducers can be connected


Ultrasonic Analyzers

   
In-line concentration measurement in the process

The process analyser PIOX® S determines the concentration or the density of liquids or further process quantities using ultrasounds. The sound velocity of the liquid is the primarily measured quantity for this task.

Go back to top


OVAL has been developing and producing wide ranges of flowmeters, related products and system products. Applications of these products have been extended to various processes of the industries and the products earned high reliability from customers.

Positive Displacement Flowmeters

Coriolis Flowmeters

       
Ultra Oval

OVAL Flowpet-EG

VRmass

ULTRAmass MKII

       
Vortex Flowmeters

Ultrasonic Flowmeters 

       
Smart EX DELTA

OVAL DELTA FLOWPET

OVAL EX DELTA

Psonic-1 Ultrasonic Gas Flowmeter

       
Electromagnetic Flowmeters
Turbine Flowmeters

Thermal Mass Flowmeters

       
MAG-OVAL II

OVAL EX Turbine

OVAL Mass Flow Monitor

Mass Flowmeter for Gas Service

Go back to top


The company produces a range of analysers capable of measuring, with superior performance, a full range of components on-line in aggressive environments often encountered in today’s industry.
The PULSI 100 series of instruments is designed for continuous on line analysis of up to six liquid phase process components. Typical applications: Caustic Strength, Water in solvents
The PULSI 200LR series of instruments is designed for in stack analysis of up to six gas phase stack emission components. Typical applications:   Monitoring NO, NO2 and SO2 Analysis from combustion process
The PULSI 300/300i series of instruments is designed for on line or in situ analysis of up to six gas or liquid phase process components. Typical applications: Percent levels of Formaldehyde, Methanol and Ether

The PULSI 400 series of analysers is designed for continuous on line monitoring of up to six gas phase, stack emission components. Typical applications: Monitoring low levels of HCl, NOx, HF and CO.
The PULSI 600LR series of analysers is designed for on line or in situ analysis of up to six gas or liquid phase process components.
The Procal 5000 range of CEM (Continuous Emissions Monitoring) instruments is designed for in stack analysis of up to 6 gas phase stack emission components.

 

 

The Analyser Control Unit (ACU) is the industrial grade controller used by all the Procal analysers. The ACU processes data from up to four analysers to produce measured values in the units required. The integral LCD uses text and graphics to provide a comprehensive readout.
 ACU for Windows
This control room software package (ACW) can be used by all Procal analysers. Installed on a PC running Microsoft Windows NT, 98 or 95, ACW is a stand-alone program that provides all the control and display requirements of a Procal Analyser system.

Go back to top


McCrometer is a global leader in providing flow measurement solutions including differential pressure (DP), electromagnetic, propeller, and variable area technologies.

 

The V-Cone Flow Meter is an advanced differential pressure instrument with built-in flow conditioning design, the V-Cone. It is especially useful in tight-fit and retrofit installations in which the long runs of straight pipe required by Orifice Plates, Venturi Tubes, and other technologies are either impractical or unavailable.
The V2 System Flow Meter has an advanced differential pressure flow sensing design. The unit features built-in flow conditioning for superior accuracy. The V2 System is the ideal new or retrofit flow meter for multiple clean water and wastewater treatment applications.
The Marsh Single-Mag L series flow meter is an insertion-type device that provides a highly cost-effective solution for the accurate measurement of liquid flow in closed conduit, pressurized pipe applications.
The Marsh Multi-Mag L series insertable electromagnetic averaging flow meter is truly a revolutionary instrument with unprecedented accuracy even in these most difficult flow conditions. 
The McPropeller is especially suited to dirty water flows, municipal and other high-volume water applications. Its leading-edge propeller flow meters offer economical and versatile flow measurement.